KYORITSU 2413R Leakage Clamp Meters

Leakage Clamp Meters

	2413R
	Selection Guide Instruction Manual
	• Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement. • True RMS enables an accurate measurement for distorted waveforms. • Measurement from mA up to AC 1000A • Frequency filter switch to eliminate the effect of the harmonics. • 2 way analogue output terminal: AC current detected by transformer jaws is converted to AC and DC voltage. Output cord model 7073 (option) is used for monitoring waveform with an oscilloscope or for connecting to a recorder.
	AC A (50/60Hz) 200mA/2/20/200/1000A |±2.5%rdg±5dgt (200mA/2/20A) |±3.0%rdg±5dgt (200A, 0 - 500A) |±5.5%rdg (501 - 1000A) AC A (WIDE) 200mA/2/20/200/1000A |±1.8%rdg±5dgt (50/60Hz) (200mA/2/20A) |±2.0%rdg±5dgt (50/60Hz) (200A, 0 - 500A) |±5.0%rdg (50/60Hz) (501 - 1000A) Conductor Size Ø68mm max. Frequency Response 40Hz - 1kHz Output Waveform : AC200mV against the maximum value of each range (1000A range is 100mV) Recorder : DC200mV against the maximum value of each range (1000A range is 100mV) Crest Factor 3.0 or less Withstand Voltage 3700V AC for 1 minute Applicable Standard IEC 61010-1 CAT III 300V Pollution degree 2 IEC 61010-2-032 Power Source 6F22 (9V) × 1 *Continuous measuring time: Approx. 60 hours Dimensions 250(L) × 130(W) × 50(D)mm Weight Approx. 570g (including battery) Accessories 9094 (Carrying Case) 6F22 × 1 Instruction Manual Optional 7073 (2WAY Output Cord)