KYORITSU 6315 Power Quality Analyzer

Power Quality Analyzer

	6315
	Applicable model list Product Catalogue Software Quick Manual Instruction Manual
• Simultaneous Power & Power quality measurements Power/ Harmonics/ Waveform/ Power quality are recorded at all CHs. (Voltage: 3ch, Current 4ch) • Helpful support functions Quick Start Guide, Wiring check and Sensor detection for easy and reliable measurement • Measurement with high accuracy Guaranteed accuracy: ±0.3%rdg (energy), ±0.2%rdg (voltage/ current) Complies with the International Standard IEC 61000-4-30 Class S and the European Standard EN50160 • Remote monitoring on PC and Android device Remote checking of measurement in real-time is possible via Bluetooth communication. Recorded data can be saved in the supplied SD card. EN50160 report can be generated after survey by PC software. • Various Clamp Current Sensors Various types of clamp and flexible sensors are available: from 1000mA Range up to 3000A Range and Earth leakage measurements • Energy consumption check on site Trend and demand graphs for easy recognition. TFT color display with high resolution. • IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V Free Android software "KEW smart 6315" is available on "Google Play Store" (*) Supporting Android ver. 2.2 - 4.4 WVGA (800 × 480) resolution or higher (*) Please search "KEW Smart" in Google Play Store. Communication charge may be incurred separately to download application.
Wiring connections 1P2W, 1P3W, 3P3W, 3P4W Measurements and parameters Voltage, Current, Frequency, Active power, Reactive power, Apparent power, Active energy, Reactive energy, Apparent energy, Power factor (cos θ), Neutral current, Demand, Harmonics, Quality (Swell/Dip/Interruption, Transients/Over voltage, Inrush current, Unbalance rate), Capacitance calculation for PF correction unit, Flicker Voltage (RMS) Range 600.0 / 1000V Accuracy ±0.2%rdg±0.2%f.s. (sine wave, 40 - 70Hz) Allowable input 1 - 120% of each range (rms). 200% of each range (peak) Display range 0.15 - 130% of each range Crest factor 3 or less Sampling speed of Voltage transient 24µs Current (RMS) Range 8128 ( 50A  type ) : 5 / 50A / AUTO 8127 ( 100A  type ) : 10 / 100A / AUTO 8126 ( 200A  type ) : 20 / 200A / AUTO 8125 ( 500A  type ) : 50 / 500A / AUTO 8124/8130 ( 1000A  type ) : 100 / 1000A / AUTO 8146/8147/8148 ( 10A  type ) : 1 / 10A / AUTO 8129 ( 3000A  type ) : 300 / 1000 / 3000A Accuracy ±0.2%rdg±0.2%f.s. + accuracy of clamp sensor (sine wave, 40 - 70Hz) Allowable input 1 - 110% of each range (rms). 200% of each range (peak) Display range 0.15 - 130% of each range Crest factor 3 or less Active power Accuracy ±0.3%rdg±0.2%f.s. + accuracy of clamp sensor (power factor 1, sine wave, 40 - 70Hz) Influence of power factor ±1.0%rdg (reading at power factor 0.5 against power factor 1) Frequency meter range 40 - 70Hz Power supply (AC Line) AC100 - 240V / 50 - 60Hz / 7VA max Power supply (DC battery) Alcaline size AA battery LR6 or Ni-MH (HR-15-51) × 6 Battery life approx. 3h (LR6, Backlight OFF) Internal memory FLASH memory (4MB) PC card interface SD card (2GB) PC communication interface USB Ver2.0, Bluetooth Ver2.1 + EDR Class2 Display 320 × 240 (RGB) Pixel, 3.5inch color TFT display Display update period 1 sec Temperature and humidity range 23±5ºC, less than 85% RH (without condensation) Operating temperature and humidity range 0 - +45ºC, less than 85% RH (without condensation) Storage temperature and humidity range -20 - +60ºC, less than 85% RH (without condensation) Applicable standards IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V Pollution degree 2 IEC 61010-2-030, IEC 61010-031, IEC 61326, EN 50160 IEC 61000-4-30 Class S, IEC 61000-4-15, IEC 61000-4-7 Dimension 175(L) × 120(W) × 68(D) mm Weight Approx. 900g Included accessories 7141B (Voltage test lead) 7170 (Power cord) 7219 (USB cable) 8326-02 (SD card 2GB) 9125 (Carrying case for KEW 6315) 9135 (Carrying case for KEW 6315-03) Input terminal plate × 6, KEW Windows for KEW 6315 (software), Quick manual, Alkaline size AA battery (LR6) × 6 Optional accessories 8124, 8125, 8126, 8127, 8128 (Load current clamp sensor) 8129, 8130 (Flexible clamp sensor) 8146, 8147, 8148 (Leakage and Load current clamp sensor) 8312 (Power supply adaptor) 9132 (Magnetci carrying case)